Source-checkedTechnology & automation

Create: Smoke Stacks - Lite

by Fresh_Lean · for Minecraft

If you've built a steam boiler in Create to drive engines, this mod makes it look and feel like a real, working piece of industrial machinery: smoke rises from it while it's running, just like a real boiler or chimney would.

2.0KDownloads
4 mo agoLast updated
MITLicense
NeoForgeLoaders

About Create: Smoke Stacks - Lite

From Modrinth

If you've built a steam boiler in Create to drive engines, this mod makes it look and feel like a real, working piece of industrial machinery: smoke rises from it while it's running, just like a real boiler or chimney would.

Create: Smoke Stacks

Adds smoke to running Create steam boilers, plus a set of connectable chimney blocks to route that smoke wherever you want.

If you run steam power in Create, your boilers currently just sit there silently. This mod gives them a visible sign of life: while a boiler is actually running, smoke rises from it, and how much smoke you get scales with how hard the boiler is working.

Show Case - https://youtu.be/hABhWaCKPrU?si=TWtR8foSVJivEpUA

What it does

  • Boilers smoke while running. Any Create fluid tank set up as a steam boiler (heat + water + attached engines/whistles) puffs out campfire-style smoke from its open top while it's active.
  • Smoke intensity matches boiler level. This uses the same effective boiler level Create's own goggle overlay shows (the minimum of heat, water, and boiler size). A high-level boiler (9+) puts out a tall "signal" plume; a boiler that's only just getting by gives off a light wisp.
  • Smoke Stack block. A flue pipe segment that auto-connects to neighbouring segments in any direction, including corners and T-junctions. Build a duct network from the top of a boiler and the smoke exits at the open ends of the pipe instead of the bare tank — vertical ends get a flared chimney cap, horizontal ends puff smoke out sideways. A stack can also be mounted flush against the side of a boiler, whistle-style, and a copper mounting plate renders automatically wherever a segment meets a tank.
  • Large Smoke Stack block. A full-width industrial chimney that stacks with itself and can connect to regular Smoke Stacks. An open large-stack end puts out a wider, heavier column of smoke (double the normal share); multiple open ends split the smoke between them.

Compatibility

  • Works with Sable / Create Aeronautics: smoke correctly follows moving Sable structures, so a flying steam-powered airship smokes properly in flight.
  • If a redstone-enabled Aeronautics steam vent is mounted on a boiler, that boiler's chimney smoke is suppressed automatically (the steam is being vented there instead). This is a soft dependency detected at runtime Aeronautics is not required for the mod to work.

Before you download

  • Requires Create 6.0.0 or newer and NeoForge on Minecraft 1.21.1. It is an add-on, not a standalone mod Create must be installed alongside it.

Highlights

From source data

Game versions

Built for Minecraft 1.21.1.

Loaders

Runs on NeoForge.

Footprint

Rated a light load on a server.

Create: Smoke Stacks - Lite on Nxeon

From our catalogue
One-click install
Supported on Nxeon Minecraft servers. We download it from Modrinth, place it, and restart the server.
Server side
Required on the server
Server type needed
NeoForge
Server load
light
Smallest plan we suggest
Minecraft — 2 GB (2 GB RAM). This follows our own load rating above, not a benchmark.
Latest build
1.2.0, released 2026-07-12

Game versions by loader

LoaderGame versionsNewest
NeoForge1.21.11.21.1

From 2 recorded builds of Create: Smoke Stacks - Lite.

Recent builds

BuildReleasedGame versionsLoaders
1.2.02026-07-121.21.1NeoForge
1.0.02026-07-121.21.1NeoForge

Dependencies

  • Required: modrinth project LNytGWDc (modrinth, not in our catalogue)

Declared by the newest build that lists any. Required ones are installed with it on one-click installs.

Run Create: Smoke Stacks - Lite on a Minecraft server

Pick a server or deploy a new one above; it is installed in one click.

What kind of mod it is

From the catalog
Listed on Modrinth as “Mods”

Technology & automation

Machines, power, logistics and automation.

Runs on your server

From source side support

Modrinth lists Create: Smoke Stacks - Lite as required on the server. Check its Modrinth page to see whether players need it too.

Compatibility

Game
Minecraft
Loaders
NeoForge
Runs on
Serverrequired on the server
Game versions
1.21.1

Verified at the source

  • ✓ModrinthOfficial listing, checked 2026-10-02Open ↗
  • ✓AuthorFresh_Lean, as published on Modrinth
  • ✓LicenseMITFree

Create: Smoke Stacks - Lite, answered

Generated from the mod’s own source data.

Do my players need to install Create: Smoke Stacks - Lite?

Modrinth lists Create: Smoke Stacks - Lite as required on the server. Check its Modrinth page to see whether players need it too.

Which loaders does it support?

NeoForge.

Is it free?

Yes. Create: Smoke Stacks - Lite is free to download from Modrinth. Its license is MIT.

How do I add it to my Nxeon server?

Use “Add to a server” on this page, or open NxLabs from your dashboard. We install it, restart your server and switch it on.

NxLabs

Run Create: Smoke Stacks - Lite on a Minecraft server.

Deploy in about a minute from $4.99 a month, then add Create: Smoke Stacks - Lite in one click.