Vertical Splitters and Mergers

Each vertical splitter/merger has an extra two item ports in the center of the unit, which you can attach a Conveyor Lift to. The belt connection nodes are pretty crowded, so double check if you are connecting to a side port, or one of the vertical ports.

You can connect one lift starting from the splitter itself (the viewing/aiming angle is a bit tricky but the hologram should appear from the center of the splitter), the second lift must start somewhere else, then attach to the center of the splitter (weird soft clearance rules). Placing a lift in the center of the splitter is easier if the side ports are already occupied by belts.

The Type A splitters and mergers will have their unique input/output port on the side, like a vanilla one would.

The Type B units have their unique input/output port in the top or bottom, so that you can for example, feed a splitter from above/below. The B types will have both an input and output port in the center, so the most reliable way to connect to them is to build a lift above or below, and bring the other end into the splitter with the appropriate belt direction (when freebuilding conveyor lifts, the default key to swap belt direction is R).

All vertical splitters/mergers are unlocked with the vanilla splitters

Credit

Commissioned by @Mighty Mackinac#3437

All mesh assets are from the vanilla game.

Contact

https://discord.gg/xkVJ73E