Atmospheric Realism Overhaul [Beta]

this mod is currently outdated and not working! but it's not abandoned. update will come when time allows it

[strike][h1]Full list of changes: [/h1] Version 0.14

• Added realistic breathing. The fluctuation in your suit pressure is your lungs expanding and contracting.
• Reduced Heat Exchanger mix rate without pressure difference.
• Added Heat Exchanger to atmos tablet. Hold Left-Shift to switch between the two internal atmospheres.
• Pipe radiators have reduced effect on stale gas. Keep the gas slightly moving for full effect. (10L pr tick movement gives full effect, no movement gives 30%)
• Change RatioOneAtmosphereClamped to sigmoid function. In practice this means convection and radiation scales with pressure all the way. 3kPa = 5%, 20kPa = 28%, 100kPa = 75%, 450kPa = 90%, 5MPa = 99%
• Corrected flow calculation.
• Slightly reduced overall gas mixing rate.

Version 0.13

• Fixed breathing bug.
• changed most flow and mix rates. Most notably large and medium radiators. These will mix very slowly with the connected pipe networks unless there is a pressure difference.

Version 0.12

• Fixed Ice Crusher bug.
• Implemented mod on remaining gas transfer methods.
• Added the extra atmosphere data to rooms.

Version 0.11

• Fixed gas mixing bug.
• Added max limit to AC (14kJ).
• Added information to atmos tablet:
• The molar value is "flow". Number of moles that went in and out during last tick. This is not change in total mole quantity. If 4 moles goes in & 6 moles goes out this will read as 4.
• The energy value is energy added or removed by this mod each tick. This is the adiabatic heating & cooling mostly, but it also shows AC energy transfers.

Version 0.10

• Volume pumps & Advanced Furnace Pump act as compressors. They are able to compress gas, thus move gas from a low-pressure pipe to a high pressure pipe.
• Volume Pumps & Advanced Furnace Pump power draw scales with compression work done to the gas.
• Active vents can only create limited pressure difference (2 atmospheres).
• Active vents move volumes of gas, not static mole amount. Creating vacuum will take significantly longer.
• Regulators/Mixer/AC/Filter/H2Combuster doesn't include a pump. They will still serve their functions but are unable to move gas "against the flow". They will process mass much faster on high pressure difference. (they move gas like one-way valves but while doing their function).
• Mixer output will equalize with lowest pressure input.
• Mixer will produce the exact mix the dial indicates, regardless of pressure and temperature differences.
• Filtration devices allow filtered and un-filtered gases to equalize independently.
• Filtration devices Filters degrade on filtered mole quantity, not time. (doesn't affect suit filters)
• Regulators/Mixer/Filter - Power draw reduced to 10W.
• Manual Valve & Digital Valve will not equalize instantly.
• Digital Valve Setting variable control valve opening (equalization speed).
• Gas Fuel Generator inputs 10 liters of input pipe content.
• Gas Fuel Generator pressure needle fixed and added damage on overpressure.
• Gas Fuel Generator Waste compression calculation: if the GFG needs to compress its internal combusted gas into the waste pipe, this compression energy will be subtracted from the power generated.
• Air Conditioner energy transfer will scale with throughput. Power draw scales with energy transfer & efficiency factors. Efficiency factor at 0% means power draw = infinite.
• Air Conditioner Temperature differential factor slightly kinder.
• Air Conditioner base power draw pr unit energy transfered increased roughly 4x.
• Turbine generator: power generated changed to use the same energy decompression math. Don't expect to be able to make infinite power loops. (But maybe if you find a rocket engine?)