[F&S] Emergency Power System

Description

Automaticaly turn on a generator(s)(Solid/Gas) when there is a low energy in batteries. Supports unlimited generators.

Turns on generator(s) if charge less then 5%. Turns off generator(s) if charge more then 50%.

Requirements

[olist] [*]1 IC Housing. [*]1 Integrated Circuit (IC10). [*]1 Solid Fuel Generator or Gas Fuel Generator (Supports only one type per system) [*]1 Stationary Battery (or/and) Stationary Battery Large. [/olist]

IC ports description

[table] [tr] [th]Port[/th] [th]Device[/th] [/tr] [tr] [td]D0[/td] [td]Generator[/td] [/tr] [tr] [td]D1[/td] [td]Alert. (Optional not required. Turns on the Flashing Light/Klaxon Speaker/Any device)[/td] [/tr] [/table]

Chip states

[table] [tr] [th]State[/th] [th]Description[/th] [/tr] [tr] [td]0[/td] [td]All fine, normal discharge[/td] [/tr] [tr] [td]1[/td] [td]Charge[/td] [/tr] [tr] [td]2[/td] [td]Overload[/td] [/tr] [tr] [td]3[/td] [td]No Battery(s)[/td] [/tr] [tr] [td]4[/td] [td]No Generator(s)[/td] [/tr] [/table]

Changeable values in IC code

define MinPercentage 0.05 # 5%
define MaxPercentage 0.5 # 50% # 1.0 = 100%

Note

If you need more than 100kW, separate the power lines and connect a separate emergency power system to each line You can mix different types of batteries. You can connect an unlimited number of generators, but only one type. Overload - means that energy production is less than consumption. Percentage is calculated individually for each type of battery. (It is normal for some batteries to run out completely. But charging will go until all batteries are filled to the desired percentage.)

Game version support

0.2.3920.18842 06/04/2023