Source-checkedOther

[F&S] Room Temperature Control

by 123 · for Stationeers

Description Allows you to control the temperature in the room within the specified limits. This scheme works fine in small rooms and use hysteresis method to prevent unwanted rapid switching.…

2.0KDownloads
4 yr agoLast updated
18 KBFile size
Steam WorkshopSource

About [F&S] Room Temperature Control

From Steam Workshop

Description Allows you to control the temperature in the room within the specified limits. This scheme works fine in small rooms and use hysteresis method to prevent unwanted rapid switching.…

Description

Allows you to control the temperature in the room within the specified limits. This scheme works fine in small rooms and use hysteresis method to prevent unwanted rapid switching.

Requirements

[olist] [*]1 IC Housing. [*]1 Integrated Circuit (IC10). [*]1 Gas Sensor. [*]1 Dial. (Optional not required) The dial works in the range of 0C - 45C [*]At least one Cooler. (Connected pipes must be under pressure (CO2 are best choise) and have radiators in the external environment) (Support Gas/Liquid coolers) [*]At least one Heater. [/olist]

IC ports description

[table] [tr] [th]Port[/th] [th]Device[/th] [/tr] [tr] [td]D0[/td] [td]Gas Sensor[/td] [/tr] [tr] [td]D1[/td] [td]Dial. (Optional not required. If not mounted then the standard temperature will be 21C)[/td] [/tr] [tr] [td]D2[/td] [td]Alert. (Optional not required. Turns on the specified device. You can use any device that supports On/Off) [/td] [/tr] [/table]

Changeable values in IC code


define DesiredTemp 21 # temp in celsius
define HysteresisWindow 2 # temp difference +-2
define CheckVolatiles 1 # 1=yes,0=no
define VolatilesRatio 0.0003 # 0.03% on tablet

Chip states

[table] [tr] [th]State[/th] [th]Description[/th] [/tr] [tr] [td]0[/td] [td]All fine[/td] [/tr] [tr] [td]1[/td] [td]Low pressure (If pressure less 7 kPa IC Chip will not turn on temperature control and will sends a signal to port D2)[/td] [/tr] [tr] [td]2[/td] [td]Detected more then 0.03% of volatiles in atmosphere, automatically shuts off heaters (coolers will still work) and sends a signal to port D2.[/td] [/tr] [tr] [td]3[/td] [td]Temperature too high (if the temperature is set to 21, and the gas sensor shows 31, sends a signal to port D2)[/td] [/tr] [tr] [td]4[/td] [td]Temperature too low (if the temperature is set to 21, and the gas sensor shows 11, sends a signal to port D2)[/td] [/tr] [/table]

Important

It is strongly recommended not to disable or change the volatiles checker. Insulated pipes must be laid in the room so as not to receive heat leakage. For best results don't place gas sensor near cooler/heater.

Game version support

0.2.3920.18842 06/04/2023

Highlights

From source data

Footprint

A 18 KB download, rated a light load on a server.

Last update

Its author last shipped an update 4 yr ago.

[F&S] Room Temperature Control on Nxeon

From our catalogue
One-click install
Not available. One-click install isn't available for this game's mods yet. Download it and upload it to your server in Files.
Server load
light
Smallest plan we suggest
Stationeers — 4 GB (4 GB RAM). This follows our own load rating above, not a benchmark.
Latest build
2023-04-15, released 2023-04-15, 18 KB

Game versions by loader

LoaderGame versionsNewest
Workshop

From 1 recorded build of [F&S] Room Temperature Control.

Run [F&S] Room Temperature Control on a Stationeers server

Deploy a server above, then upload the file in Files.

What kind of mod it is

From the catalog
Listed on Steam Workshop as “Workshop”

Workshop

Its source category doesn’t say more about what it does, so NxLabs lists it under Other.

Compatibility

Game
Stationeers
File size
18 KB

Verified at the source

  • ✓Steam WorkshopOfficial listing, checked 2026-10-10Open ↗
  • ✓Author123, as published on Steam Workshop
  • ✓LicenseNot published by the sourceFree

[F&S] Room Temperature Control, answered

Generated from the mod’s own source data.

Is it free?

Yes. [F&S] Room Temperature Control is free to download from Steam Workshop.

How do I add it to my Nxeon server?

One-click install isn't available for this game's mods yet. Download [F&S] Room Temperature Control from Steam Workshop and upload it to your Nxeon Stationeers server in Files.

NxLabs

Run [F&S] Room Temperature Control on a Stationeers server.

Deploy in about a minute from $8.99 a month, then upload [F&S] Room Temperature Control in Files.