About (Outdated) Electronic-Printer-Control
From Steam WorkshopIntroduction This set of scripts allows you to control a Electronic Printer with just a few dials. No longer do you have to have your Electronic Printer in the same room! Set it up once and forget…
Introduction
This set of scripts allows you to control a Electronic Printer with just a few dials. No longer do you have to have your Electronic Printer in the same room! Set it up once and forget about it with its auto reset code (since their is a bug where the stack gets cleared on restart)! This works well with server's that want to limit what they want their users to be able to print. If the Electronic Printer is in the same room it makes it harder to print something that isn't allowed (as the script continuously sets the hash to the Electronic Printer), and you don't have to use the button if its in the same room as the script reads the Activate of the Electronic Printer. Brought to you by the Manny K SoSo Industries.
Once it is set up simply choose what you want to print, and how much you want to print, then click the button and you are good to go! It will automatically start the Electronic Printer and stop once all of it has been printed. The display showing how much you want to print will switch to produced when it is printing something. If you kept the print number at 0 it will print until it either runs out of materials or until you click the button again.
This script is designed to work with my other script to determine if what you are going to print has enough materials: Printer Success
[hr][/hr]
Required
This Script
- 1x Electronic Printer
- 1x IC Housing
- 1x Integrated Circuts (IC10)
- 4x Kit (Logic Switch)[list]
- 3x Dials
- 1x Button
[*]1x Kit (Logic I/O)[list] [*]1x Logic Writer [/list] [*]2x Kit (Consoles)[list] [*]1x Console (With Hash Display) [*]1x LED Display (Small) [/list] [*]1x Stacker [*]1x Chute Bin (Something to put your ingots into the Electronic Printer) [/list]
Printer Success Script
- 1x IC Housing
- 1x Integrated Circuts (IC10)
- 3x Kit (Consoles)[list]
- 1x Console (With Hash Display)
- 2x LED Display (Small)
[/list]
Optional (If you want to be able to export the ingots from the Electronic Printer and turn off the whole thing)
- 2x Kit (Logic I/O)[list]
- 2x Logic Writer
[*]2x Kit (Logic Switch)[list][*]1x Lever[*]1x Switch[/list] [*]1x Area Power Controller [/list]
[hr][/hr]
Setup
Once you have everything wired together its time to set up the IC Housings, Displays, and Logic This Script IC Housing:
Logic Writer:
This Script Hash Display:
Print Success Script IC Housing:
Print Success Hash Display:
*Optional Logic Writer for emptying Electronic Printer:
*Optional Logic Writer for Power Area Controller:
[hr][/hr]
Code Adjustments (Optional)
You can choose up to 74 (max) recipes within the script. Paste your order between Line 8 and 82. Note that order matters. If the line contians the phrase "(ADV)" this means you need the mod for this Electronic Printer in order to print that item. The script comes preloaded with with hashes (including the ones requiring the printer mod). At the time of posting there are ~100 recipies in the Electronic Printer. Only a max of 74 can be choosen. Some recipies will not be available.
push -466050668 # Cable Coil
push 2060134443 # Cable Coil (Heavy)
push 1722785341 # Advanced Table
push -1756772618 # Credit Card
push -2085885850 # Ground Penetrating Radar (GPR)
push -229808600 # Handheld Tablet
push -743968726 # Labeller
push 1365789392 # Chemistry Station
push -1136173965 # Microwave
push -1339716113 # Paint Mixer
push 1260918085 # Reagent Processor
push 1633663176 # Advanced Airlock
push 1618019559 # Air Controller
push 912176135 # Airlock
push -1550278665 # Atmos Analyzer
push -459827268 # Battery Cell (Large)
push 544617306 # (ADV) Battery Cell (Nuclear)
push 700133157 # Battery Cell (Small)
push -337075633 # Communications
push -932136011 # Configuration
push 1005843700 # Data Disk
push 855694771 # Door Control
push 731250882 # Electronic Parts
push -1957063345 # GPS
push -82343730 # Gas Display
push 1344368806 # Graph Display
push 1633074601 # Hash Display
push -161107071 # IC Editor
push -744098481 # Intigrated Circut (IC10)
push 1932952652 # Kit (SDB Silo)
push 1668815415 # Kit Auto Miner Small
push 724776762 # Kit Research Machine
push 502555944 # Logic
push -1134148135 # Mode Control
push 1606989119 # Network Analyzer
push -1768732546 # Ore Scanner
push 1738236580 # Ore Scanner (Color)
push -1923778429 # Power Control
push 819096942 # Research Capsule Blue
push -1352732550 # Research Capsule Green
push 954947943 # Research Capsule Red
push 750952701 # Research Capsule Yellow
push 2020180320 # Solar Control
push -1908268220 # Sorter
push 81488783 # Tracker
push -1462180176 # eReader
push -616758353 # (ADV) Kit (Advanced Furnace)
push -927931558 # Kit (Automated Hydroponics)
push -1866880307 # Kit (Battery Charger)(Outdated) Electronic-Printer-Control on Nxeon
From our catalogue- One-click install
- Not available. One-click install isn't available for this game's mods yet. Download it and upload it to your server in Files.
- Server load
- light
- Smallest plan we suggest
- Stationeers — 4 GB (4 GB RAM). This follows our own load rating above, not a benchmark.
Run (Outdated) Electronic-Printer-Control on a Stationeers server
Deploy a server above, then upload the file in Files.
What kind of mod it is
From the catalogTechnology & automation
Machines, power, logistics and automation.
Compatibility
- Game
- Stationeers
- File size
- 174 KB
Verified at the source
- ✓Steam WorkshopOfficial listing, checked 2026-09-24Open ↗
- ✓AuthorManny K SoSo, as published on Steam Workshop
- ✓LicenseNot published by the sourceFree
