(Outdated) Smart Printing

Indroduction

Have you ever wanted you printing to be smarter for both the printer and provide you the information you need to make that print successful. Look no futhur than here! I bring you the future of printing smartly by upgrading you printing experience via display that will give you all the information like the following, what ingots are required to print the item, how much of each ingot is required for the current print, the amount of that ingot left after that print is done (calculated by how much you are going to print), and how much you are going to print/how much has already been printed. With just selecting your item you want to print and a few presses via the dials and you are ready to go! Brought to you by the Manny K SoSo Industries.

Once the setup is complete it will automatically start calulations. Setting the dials to any amount will correctly display how much of that ingot is needed (depending on how much you want to print), and how much is going to be left after the print. If you do not have enough of an ingot it will turn both the required and leftover displays to red and the leftover will be a negative number saying how much of that ingot to make the print successful. This won't stop the print from happening, but just as a warning. When you are ready to print just hit the activate button on the printer and the quantity display will switch over to how many it has printed. Once it has reached the required amount the printer will stop printing. If you run out of materials during the print it will stop printing and reset. If you have the quantity set to 0 it will print till you tell it to stop or it runs out of materials.

[hr][/hr]

Required

• 1x Printer (Autolathe, Electronic Printer, Hydraulic Pipe Bender, Tool Manufactory, Security Printer)
• 1x IC Housing
• 1x Integrated Circuts (IC10)
• 2x Kit (Logic Switch)[list]
• 2x Dials[/list]
• 3x Kit (Consoles) (1 is optional)[list]
• 1x Console (With Hash Display)
• 2x LED Display (Small) (Optional)[/list]

[hr][/hr]

Setup

Once everything is wired together its time to set up the IC Housings, Displays, and Logic

• d0 Printer (Autolathe, Electronic Printer, Hydraulic Pipe Bender, Tool Manufactory, Security Printer)
• d1 LED Display (Small) (Required)
• d2 Dial (10s)
• d3 Dial (1s)
• d4 LED Display (Small) (Quantity)
• d5 LED Display (Small) (Leftover)

[hr][/hr]

Distribution

This script is distributed as is, any modification can result in the script not working correctly and causing errors. You are not allowed to redistrubute this code with changes of any kind. This includes, but not limited to, just changing the order of the stack (the hash values) or simplifying its main logic. If you do decide to redistrubute this code and post it publicly you will be stealing something that is FREE. Any redistrubution of any kind without strick permission of the owner (Manny K SoSo) will be reported. Sorry if this seems harsh, but I take exception to the hard work I put in that I provide for FREE for everyone, forever.