Solid Fuel Generator Controller

Controls a solid fuel generator. Reads from small and large batteries on the network and enables/disables the generator based on values set on set values.

Pin Configuration [table] [tr] [th]Pin[/th] [th]Name[/th] [th]Description[/th] [/tr] [tr] [td]d0[/td] [td]Generator[/td] [td]The generator to control[/td] [/tr] [tr] [td]d1[/td] [td]Silo[/td] [td](optional) A silo to monitor for fuel levels[/td] [/tr] [tr] [td]d2[/td] [td]BatteryQtyLED[/td] [td]An LED console to display current battery levels[/td] [/tr] [tr] [td]d3[/td] [td]FlashingLight[/td] [td](optional) A flashing light to alert low fuel levels[/td] [/tr] [tr] [td]d4[/td] [td]EnableSwitch[/td] [td]An override switch to force power generation[/td] [/tr] [tr] [td]d5[/td] [td]Unused[/td] [td][/td] [/tr] [/table]

Configurable Parameters Edit these parameters in the IC code to tailor the controller [table] [tr] [th]Parameter[/th] [th]Description[/th] [th]Default[/th] [/tr] [tr] [td]minCharge[/td] [td]The total battery charge when generation should start[/td] [td]0.90[/td] [/tr] [tr] [td]maxCharge[/td] [td]The total battery charge when generation should stop[/td] [td]0.99[/td] [/tr] [tr] [td]minFuelQty[/td] [td]This is the fuel level that triggers the optional flashing light. If the fuel level drops below this value, the light will turn on. If a silo is configured, this will be the number of stacks in the silo; otherwise, it will be the number of fuel items in the generator's input slot[/td] [td]5[/td] [/tr] [/table] ​ LED Display Colors [table] [tr] [td]blue[/td] [td]Power generation in progress[/td] [/tr] [tr] [td]green[/td] [td]Battery quantity >65%[/td] [/tr] [tr] [td]yellow[/td] [td]Battery quantity >35%[/td] [/tr] [tr] [td]red[/td] [td]Batter quantity >0%[/td] [/tr] [/table]