SPU HUD Mod

Displays programmable HUD information from IC10 chip memory through sensor lenses and enhances Logic Transmitter functionality.

WARNING!!!!! Critical bug detected related to the Logic Transmitter! If, at the moment of writing to the suit via the transmitter, there is no IC10 chip in the suit, the write goes into the memory of random devices! This means anything can break! When you remove the chip from the suit, disable the chips that are supposed to write to it!!!! At the moment I’m unable to fix this. The bug is critical and can break your base. I really hope the developers implement a proper Logic Transmitter. Please vote for Logic Transmitter fix here: https://steamcommunity.com/app/544550/discussions/3/601914519534549352/

FEATURES: 1. HUD Display: Shows formatted data from IC10 chip memory on sensor lenses 2. Logic Transmitter Enhancement: Allows put/get commands to connected devices through Logic Transmitter

Save Safe: this mod does not affect your save file integrity. You can disable it at any moment without consequences. But bugs in mod can brake your game!

EXPERIMENTAL: WARNING: This mod is experimental and represents a Proof of Concept implementation. The code is not fully optimized or cleaned up. Use at your own risk. Expect potential bugs, performance issues, and incomplete features. This is a development version intended for testing and feedback.

This is a Plugin Mod. It requires BepInEx to be installed with the StationeersLaunchPad plugin. See: https://github.com/StationeersLaunchPad/StationeersLaunchPad

HUD USAGE: 1. Wear a suit with an IC10 chip 2. Wear sensor lenses and turn them on 3. Use defines with "HUD" prefix in IC10 code to set HUD data addresses

IMPORTANT: Only defines that start with "HUD" prefix will be displayed in the HUD. Examples: HUDTemperature, HUDPressure, HUDOxygen, HUDFuel, etc.

LOGIC TRANSMITTER USAGE: - Connect Logic Transmitter to any device - Use put/get commands on Logic Transmitter to access connected device's memory - Example: put d0 0 100 (writes 100 to memory address 0 of connected device)

IC10 CODE EXAMPLE: # Define HUD variables - MUST start with "HUD" prefix! define HUDTemperature 100 define HUDPressure 110 define HUDOxygen 120 define MyVar 1000

# Set temperature display move r0 HUDTemperature put db r0 25.5 # value: 25.5 add r0 HUDTemperature 1 put db r0 1 # show flag: 1 (show) add r0 HUDTemperature 2 put db r0 6 # format: 6 (Celsius from Kelvin) add r0 HUDTemperature 3 put db r0 4 # color: 4 (Red)

# Note: Variables without "HUD" prefix (like "Temperature", "MyVar") will be ignored

MEMORY STRUCTURE (10 cells per HUD item): Offset 0: Value to display Offset 1: Show flag (0=hide, any other=show) Offset 2: Format code (0-8) Offset 3: Color code (0-11) Offset 4-9: Reserved

FORMAT CODES: 0: Float with 2 decimals (25.50) 1: Integer (25) 2: Normalized percent 0.0-1.0 → 0%-100% (75%) 3: Percent with 2 decimals (98.25%) 4: Kelvin with °K (298.15°K) 5: Celsius with °C (25.00°C) 6: Kelvin to Celsius conversion (25.00°C) 7: Pressure Pa/kPa/MPa auto-scaling 8: Integer with L suffix (25L) 9: Show only key name, without value

COLOR CODES: 0=Blue, 1=Gray, 2=Green, 3=Orange, 4=Red, 5=Yellow, 6=White, 7=Black, 8=Brown, 9=Khaki, 10=Pink, 11=Purple

Source Code: https://github.com/Allexin/Stationeers_SPUHUD