ShipYard

Function:

This acts as giant fly through welder/shipyard that you can use to build ships off a projector, or just for repairs after a battle.

Specs:

The corner section is 5x5x3 in size, and the flat section is 5x3x1 in size.

Instructions:

Placing the first corner section can be a bit tricky, but I've found that the best method is to place some temp blocks 3x3 on the flat section. After that the rest of the corner sections are not to bad to place. Now you can build this as wide as you want, but do not put more than 2 flat sections going up, or it will leave a gap in the middle that won't weld. Also there are conveyor connections on the sides of the flat section and on one end of the corner section for connecting it to the conveyor system I just didn't add them to the texture. I may add this to the texture at a later time.

UPDATE:

Added a extended range flat section this will allow you to add 1 more flat section giong up, but do to a limitation in the game code makes it where the extended range flat section won't weld next to it's self. So the way I found to work around this is to alternate between the extended range, and the standard flat section when placing them. See pic above. This gives you the max weld value.

UPDATE 2:

Fixed all the textures so you can now tell where all the conveyor connections are located.

UPDATE 3:

Added 3 grinder blocks the Flat Grinder, Flat Grinder XR, And Corner Grinder setting them up works just like the welders

[h1]UPDATE 4:[/h1] Added code so in dev branch blocks are now under 1 tab

[h1]UPDATE 5:[/h1] crash issue fixed thanks to [OOR] Jo'

[h1]UPDATE 6:[/h1] Fixed welder range issue

[h1]UPDATE 7:[/h1] Increased sensor radius a bit more to solve the welder and grinder missing blocks in the middle [h1] Side note [/h1] the corner section will now damage you on the outer edge